Big vibrating fluid bed dryer ship to old client in Europe 

Vibration drying fluidized bed, new energy-saving and high-efficiency dryer - drying equipment

Product Introduction

The vibrating fluidized bed dryer consists of a fabric system, an inlet air filtration system, a heating and cooling system, a main engine, a separation and dust removal system, a discharge system, an exhaust system, a control system, etc.

Applicable materials

Suitable for products with coarse or irregular particles that are not easily fluidized, or products that require lower fluidization speed to maintain particle integrity, as well as products that are easy to bond, temperature sensitive, dry, and remove surface water from materials containing crystalline water

The vibrating fluidized bed dryer consists of a fabric system, an inlet air filtration system, a heating and cooling system, a main engine, a separation and dust removal system, a discharge system, an exhaust system, a control system, etc. During operation, the material is fed into the drying chamber of the vibrating fluidized bed dryer by the fabric feeder. The material meets with hot and cold air in the drying chamber, forming a fluidized state for heat and mass transfer, completing drying and cooling. A small amount of fine powder is carried by the wind and enters the cyclone separator. Under the action of centrifugal force, the material settles along the cylinder wall and is separated. The trace amount of fine powder that has not been separated by the cyclone separator enters the bag filter, is captured and recovered, and the humid air is discharged. Control system: The pressure measurement and temperature measurement signals from the inlet and outlet, as well as the transmitter signals from the temperature measurement points, are transmitted to the DCS. The temperature at the hot air inlet needs to be remotely controlled by controlling the steam ratio reversing valve to keep the inlet temperature within the set range. The main parts of the system control and display signals (including temperature, wind pressure, etc.) are displayed on the instrument cabinet.

EYH-10000 Mixer ZS-1000/ZS-1500 Vibrating screen ready to shipping USA 

A two-dimensional motion mixer refers to a mixer in which the drum can move in two directions simultaneously. The two directions of motion are the rotation of the drum, which swings with the swing frame. The mixed materials undergo left and right back and forth mixing movements with the rotation, flipping, and mixing of the drum, while also swinging with the drum. Under the combined action of these two movements, the materials are fully mixed in a short period of time.

The two-dimensional mixer consists of three main parts: a rotary drum, a swing frame, and a machine frame. The drum is mounted on the swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are dragged by the rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components, allowing the rotating drum to participate in swinging while rotating, allowing the materials in the drum to be fully mixed

ZS-1000 and ZS-1500 Vibration Sieves delivery to the USA

The oscillating screen is composed of a hopper, an oscillating chamber, a coupling, and a motor. The oscillation chamber is composed of an eccentric wheel, rubber software, main shaft, bearings, etc. The adjustable eccentric heavy hammer is driven by a motor to reach the centerline of the spindle, generating centrifugal force in an unbalanced state, which changes the strength of the material and forms a track vortex inside the screen. The amplitude of the heavy hammer adjuster can be adjusted according to different materials and screens

Oscillatory screening: Any particle, powder, or mucus can be screened within a certain range. The screening can be as fine as 500 mesh or 0.025mm, and the filtration can be as small as 5 microns. Graded screening, capable of screening one to five layers of sieves, and can simultaneously perform sorting or filtering of two to six levels.

Efficient and precise screening: fully enclosed structure, no powder flying, no liquid leakage, no mesh blockage, automatic discharge, no material storage inside the machine, no dead corners in the grid structure, and increased screen area.

Features: Designed with mother and child, double A, and stamped grid structures, screen replacement can be completed in 3-5 minutes using only 2 people. The machine and screen have a long lifespan, low energy consumption, and low maintenance costs. The three-dimensional vibration generated by the vibration source of the ternary rotary vibrating screen is powerful and stable, and the equipment can be installed in any desired position and is easy to move.