BG-300E High Efficiency Coating Machine ship to Poland  

High Efficiency coating machine (drug coating equipment)

The high-efficiency coating machine is an electromechanical integrated equipment that is efficient, energy-saving, safe, clean, and meets GMP requirements for coating sugar coatings, organic film coatings, water-soluble film coatings, and slow-release and controlled release coatings in traditional Chinese and Western medicine, tablets, pills, micro pills, small pills, water pills, drop pills, and pellet making. It is a new technology in domestic drug production that ensures drug quality and shelf life through drug coating.

working principle:

Surui (pellets, small pills, or tablets, etc.) moves in a complex trajectory under the action of a streamlined guide plate inside a clean and sealed rotating drum, automatically spraying coating dressings according to process parameters. At the same time, under negative pressure, hot air is introduced from one side of the gas distribution pipe at the center of the drum, and clean hot air passes through the Surui layer and is buried in a duckbill shape with numerous small holes. The fan gathers on the other side of the gas distribution pipe and is discharged, allowing the coating medium sprayed on the surface of the Surui to dry quickly and uniformly, forming a strong, dense, flat, and smooth surface film on the surface of the Surui.

NIP-400/800 Automatic capsule filling machine shipping to Thailand 

NJP400 Automatic Hard Capsule Filling Machine，pill Filling Machine

The NJP-400 series automatic capsule filling machine is a device that fills hollow capsules with materials such as powder, particles, or small pieces. This product adopts hole plug filling, intermittent operation, variable frequency speed regulation, and is suitable for automatic filling of powder or pellet shaped capsule drugs, such as spreading, separating, filling, (waste bag removal) locking, and finished product output. It is an ideal filling machine developed by our factory by absorbing the advantages of similar products at home and abroad and combining them with the actual situation in China. The production process fully complies with GMP standards. Since its launch, it has been highly favored by pharmaceutical research institutes, hospitals, and small pharmaceutical factories, and has gradually phased out semi-automatic capsule filling machines, which are well received by domestic and foreign merchants.

Machine features:

◆ Smooth operation, safe and reliable

The capsule loading rate is greater than 99%, and the dosage is accurate

◆ Variable frequency speed regulation, programmable control

New enclosed structure, compliant with GMP standards

Main features:

Improved the internal design of the mold turntable, using original Japanese linear bearings to ensure the accuracy and service life of the equipment.

Adopting a cam down design, an increased pressure atomization oil pump is added to maintain lubrication in the cam groove, reduce wear, and extend the service life of components.

◆ Adopting computer control, stepless variable frequency speed regulation, and digital display for easy operation, eye-catching and intuitive.

Based on the lower plane of the measuring disc, a three-dimensional adjustment mechanism is used with uniform gaps to ensure accurate measurement and control within ± 3.5% for differences in loading volume.

◆ It is equipped with safety protection devices for both humans and machines, and has an automatic shutdown device for material shortage, achieving stable, safe and reliable machine operation. It is an ideal equipment for pharmaceutical factories producing hard capsule preparations such as drugs and health products.

试试AI翻译

笔记

LPG-5  High speed centrifugal spraying dryer  packing HB-4 counting machine to Russia  packing pictures Round bottle labelling machine

Spray dryer is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spherical particles in a certain size ratio. Spray dryer is a kind of continuous atmospheric pressure dryer. Spray the liquid material into a mist using special equipment, and dry it by contacting it with hot air. Used for drying some heat sensitive liquids, suspensions, and viscous liquids, as well as for drying fuels, intermediates, soap powders, and inorganic salts. Generally, it includes electric blast drying oven, vacuum drying oven, high-speed centrifugal spray dryer and sterile spray dryer. The working principle, basic classification, characteristics, technical parameters, application scope and operation process of spray dryer are introduced in detail

After filtering and heating, the air enters the top air distributor of the dryer, and the hot air enters the drying chamber uniformly in a spiral shape. The feed liquid passes through the high-speed centrifugal atomizer on the top of the tower body, and (rotating) spray into extremely fine mist like liquid beads, which can be dried into finished products in a very short time in parallel with hot air. The finished product is continuously output from the bottom of the drying tower and the cyclone separator, and the exhaust gas is discharged by the induced draft fan

Tablet tube filling machine ship to Russia 

1.  Introduction

The straight tube bottle packaging machine and  VC vitamin tablet tube loading machine For Tablet is applicable to the packing bigger and thinner tablets which are orderly fed into bobbin bottles in single row in an overlapping way . The device utterly adopts a PLC for centralized control, it is verified in fiber and photoelectric detections and other kind of detections to have steady performance and reliably automatic operation. It can automatically give alarms and shut down in case of no tablets , bottles or covers .

its part in contact with the tablets is made of superior 304 or 316 stainless steel , which totally meets the GMP requirement .Thus , it is the best device for pharmaceutical factories .health product factories and food factories to pack tablets and other products alike .

2.component parts and function :

1)Cap Vibrating pan:  put capping to vibrating feeding by manual, it will according to design cap direction and send fix press-cap location auto

2)Feeding Vibrating parts: manual put tablet into hopper, vibrating feeder will send tablet make sorting parts, this parts send tablet device and sorting tablet parts automatically. When over tablet is more that will stop send tablet, otherwise will send tablet.

3)Tablet sorting parts and Collection parts: This parts function will no-sorting tablet arrange well according to same direction and design quantity , also collection and together and send into push tablet parts.

4)Push tablets into tubes (bottle): when check have bottle that will lift auto, tablet auto and send tablet cylinder will put tablet into bottle. 

DXD-420  vertical packing machine and finished product conveyor 2 wooden cases to Britain

The fully automatic vertical packaging machine has a wide range of applications, mainly used for automated packaging of loose materials in food, daily chemical, agricultural products, plastic products, hardware and special industries. It is mostly used in the food industry, such as loose bagged foods such as pine nuts, potato chips, peanuts, nuts, pistachios, etc. The machine is suitable for various composite film and aluminum foil packaging materials. At present, the device has been produced and used by multiple enterprises. It is understood that the production efficiency is high and it is very suitable for some small and medium-sized enterprises to use. At the same time, large enterprises can also order in bulk and produce at the same time because the device occupies a small area and is very space saving.

Main features:

1. All processes from feeding, weighing, filling, date printing to finished product output are fully automated;

2. The multi head scale automatically weighs according to the preset weight, and different weights only need to be preset on the touch screen of the multi head scale; Small bags and large bags: Several small packages of drugs, food, daily necessities, etc. can be directly put into large bags;

3. PLC control, color touch screen, high degree of automation, easy to operate and maintain. The whole machine runs smoothly and has low noise;

4. The entire equipment adopts a split structure, and the components are designed separately with snap fasteners, which is easy to disassemble and maintain, reducing the time for machine adjustment and maintenance;

5. Touch screen operation control display interface, servo film transport system, horizontal sealing pneumatic control, accurate positioning, overall performance, and beautiful packaging;

6. The main controller adopts Siemens PLC control, which can be upgraded and can control requirements such as single and multiple material discharges. Upgradeable, adding a reserved QR code traceability data port, applicable to the traceability management requirements implemented in existing countries.

7. The machine has a complete automatic alarm protection function;

8. The design of the safety protection door ensures that if the door is opened abnormally, the equipment will automatically shut down, reducing the harm caused by manual misoperation.

9. The hoist is equipped with a level sensing device for automatic control of start and stop, which can add automatic powder screening and iron chip suction functions (equipped with magnetic bars and sediment vibrators);

10. The intelligent heat transfer coding machine can achieve product name, quantity, specifications, place of origin, production date, production batch number, storage conditions, etc